Pots diameter to be used : min 12cm, max 28 cm in order to obtain maximum heating efficiency.

Suitable for countertop installation.

Glass ceramic cooking surface with 4 independently controlled induction zones with a power of 5 kW per zone.

Almost the entire surface of the ceramic plate can be used without ”dead” spots.

One indicating lamp for each zone located on control console.

Induction plates endowed with overheating safety device.

Power to the individual zones can be set with progressive output i.e. fine regulation at the lower and larger progress at the upper levels.

Low heat dissipation to the kitchen.

The smooth, glass ceramic plate is not directly heated, so there is no burning on cooking surface.

IPX5 water protection.

Unit is 900mm deep to give a larger working surface area.

All exterior panels in Stainless Steel with Scotch Brite finishing.

AISI 304 stainless steel worktop, 2mm thick.

Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.