Control knobs provide smooth, continuous rotation from min to max power level.

Unit to be mounted on stainless steel feet with height adjustment up to 50 mm. Unit can be easily mounted on cantilever systems.

The three 6 kW and one 10 kW high efficiency burners are available in two different sizes to suit high performing cooking requirements of the most demanding customers.
• 60 mm burners with continuous power regulation from 1,5 to 6 kW

• 100 mm burners with continuous power regulation from 2.2 kW to 10 kW

Gas burners supplied for use with natural or LPG gas, conversion jets supplied as standard.

Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.

Burners with optimized combustion.

Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.

Protected pilot light.

Base compartment consists of an electric standard oven with 40 mm thick oven door for heat insulation, positioned beneath the base plate.

Oven chamber with 3 levels of runners to accomodate 2/1 GN shelves (2 steam pans).

Ribbed cast iron oven base plate.

Oven thermostat adjustable from 110 °C to 285 °C or from 120 °C to 280 °C for model 391164.

The special design of the control knob system guarantees against water infiltration.

IPX5 water protection.

Unit is 900mm deep to give a larger working surface area.

Pan supports in stainless steel.

All exterior panels in Stainless Steel with Scotch Brite finishing.

AISI 304 stainless steel worktop, 2mm thick.

Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.