Electrolux 900XP Gas Cylindrical Boiling Pan 150lt indirect heat - autoclave PNC 391104

Main Features

• Autoclave lid with air insulation in the jacket, watertight rubber gasket, safety valave and sturdy stainless steel handle, to allow cooking with a slight overpressure (0,05 bar).

• Minimum load for correct funtioning is 20 liters.

• Round kettle is suitable to cook, saut or poach all kinds of produce.

• Produce is uniformly heated in the base and side walls of the kettle by an indirect heating system that uses integrally generated saturated steam at a temperature of 110 C in the jacket.

• External valve allows to manually evacuate excess air accumulated in the jacket during heating phase.

• Appliance is IPX5 water resistance certified.

• Manometer allows to correctly control the functioning of the pan.

• Energy regulation through a control knob.

• Safety thermostat protects against low water level.

• Safety valve avoids overpressure of the steam in the jacket.

• No overshooting of cooking temperatures, fast reaction.

• Large capacity food tap enables safe and effortless discharging of contents.

• Firmly fitting cover to reduce cooking time and save energy costs.

• Ergonomic: the depth of the vessel facilitates stirring the food, also the most delicate food.

• Discharge tube and tap are very easy to clean from outside.

• Closed heating system no waste of energy.

• Solenoid valve to refill with hot and cold water.

• Smooth large surfaces, easy access for cleaning.

• Pressure switch control monitors energy and water consumption.

• The special design of the control knob system guarantees against water infiltration.

• Kettle shall be double jacketed including high quality thermal insulation of the pan, saving energy and keeping ambient temperature low.

• Pressed cooking vessel and double jacket in 316 AISI Stainless steel.

• Robust burners in stainless steel with flame failure device, protected pilot light and optimized combustion.

• All exterior panels in Stainless Steel with Scotch Brite finishing.

• Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.